Ambient ACL 203 Manuel d'utilisateur télécharger pdf (Page 7)

and Pull down frame rates are used together respectively. ie 24,25 30 Fps

together, and 29.97. 23.98 Fps together.

• This feature can be used to jam the lockit once to a playback timecode

Using a transmitter and receiver on the Lockit box. The lockit will jam once

to the incoming playback timecode and also ignore RF dropouts of up to 3

seconds. Note Playback TC of a Video player is often jittery and cannot be

read by a camera. The Lockit delivers smooth code and sync.

• Remote rejam of all Lockits can be implemented in a multicamera shoot

using a TC transmitter and receivers on all cameras.

2.3 Insert userbits in running time code

• In normal operation dip switch 1 is off and timecode jam is enabled. If after

jamming TC dips witch 1 is set “on” (down) then the Lockit will not rejam to

externally connected timecode but will extract userbits from this TC and

insert them in the Lockits running code without disturbing sync. The LED

will flash green in long / short bursts per second. In this way using an event

number in the userbits of an external timecode, all cameras can be userbit

updated without rejamming.

• Note: after setting dip switch 1 to “off” again, The ACL 203 will still not jam

when receiving the first time code. Only after disconnecting and

reconneting time code after 3 seconds it will jam again.

1 2 3 4 5 6 7 8 9

Pas de commentaire

Ambient ACL 203 Manuel d'utilisateur Page 7